We have pieces of white opaque Plexiglas, roughly 2 feet long, 6 inches wide, and a 1/4 inch thick... if you need some. We also have a couple of pieces that are gray.
I don't know quite what kind of plexiglass I'm going to need, I'm going to wait until I figure out the display arrangement first. It's very kind of you to offer, but I'm most likely going to get a full size sheet and just black out the parts where the lights aren't (display area is 16 inches tall by 18 inches wide).
I had to trim down a large piece of the bezel. It was pointed out I could have used a smaller, cheaper piece for the bezel and just gotten a simple wood strip to fill in the final inch. With the way I'm planning the display, no one would know unless they looked inside. But for this, I'm turning into Rarity -- "It's nice...but it needs to be perfect!"
Comments 2
Reply
I had to trim down a large piece of the bezel. It was pointed out I could have used a smaller, cheaper piece for the bezel and just gotten a simple wood strip to fill in the final inch. With the way I'm planning the display, no one would know unless they looked inside. But for this, I'm turning into Rarity -- "It's nice...but it needs to be perfect!"
Reply
Leave a comment