-
show interface status solaris
There are two commands that can be very useful to see network interfaces status, and speed. But you must have root privileges to run them
bash-3.00# dladm show-dev
e1000g0 link: unknown speed: 0 Mbps duplex: half
e1000g1 link: unknown speed: 0 Mbps duplex: half
e1000g2 link: unknown speed: 0 Mbps ( Read more... ) -
run process independent of shell
nohup /home/user/yourscript >/home/user/yourscript.log 2>&1 & -
get link status in solaris
ndd -set /dev/hme instance 0
ndd -get /dev/hme link_status
ndd -get /dev/hme link_mode
ndd -get /dev/hme link_speed
http://www.tech-recipes.com/rx/131/check-hme-ethernet-link-speed-duplex-and-status-in-solaris/
ndd -set /dev/hme instance 0
ndd -get /dev/hme link_status
ndd -get /dev/hme link_mode
ndd -get /dev/hme link_speed -
llc interface plumb /dev/llc2
http://opensolaris.org/jive/thread.jspa?messageID=361615
# dladm show-link
LINK CLASS MTU STATE OVER
e1000g0 phys 1500 up --
# dladm create-vnic -l e1000g0 vnic0
dladm: vnic creation over e1000g0 failed: object already exists
# ifconfig vnic0 plumb
ifconifg: cannot open link "vnic0": DLPI link does not exist
I've opened CR#6798106 for this...
http://www. ( Read more... ) -
perl command to get and parse web page
#!/usr/bin/perl
open CMD, "wget -q http://www.anti-abuse.org/rblresults.php?host=192.168.1.1 -O - |";
while () {
if (!/listed in /) { next; }
if (!/NOT listed in /) { $error++; }
}
if (!$error) {
print "OK\n";
exit 0;
} else {
print "CRITICAL: $error\n";
} -
find process that locks tcp port in solaris
/usr/bin/ps -ef -o pid -o args | egrep -v "grep|pfiles" | grep $f -
solaris cpu display
http://www.mysysad.com/2006/10/view-processor-speed-and-ram-size.html
# /usr/platform/sun4u/sbin/prtdiag -v
If you want the CPU speed(s) only:
# psrinfo -v
If you want RAM only:
# prtconf | grep Memory