Grrr. Efforts to set up wireless on top of my apartment building's network are failing, now that I've dropped $30 and had an Interesting Day in pursuit of a power brick for my AP. (ok, I sought lots of things, and attained all of them, but Interesting's the word for it.) Am tired of being tethered to this desk now
(
Read more... )
Comments 6
Reply
Reply
(Why? Because some servers try to ensure that each subscriber/customer only connects with one device. If you want to use another device, you have to wait long enough for it to forget about the old one.)
Reply
My dsl modem has a fit if I swap hardware. I have to power it down, hook it to what it's going to run on, and bring it up, otherwise it refuses to see anything. When I do that, bring it up, and bring up the downstream box, everything's fine, whether the downstream box is a NAT/firewall or just a switch/router.
Reply
(1) do you have the WRT54GL configured to clone the MAC address of the device that works right when it's connected directly to the modem?
(2) did you remember to turn the modem off before connecting the router? (yes, that means waiting for it to reconnect if it's cable or dsl.)
Usually, it is necessary to do ONE of the above. I'd try both if you're still having trouble.
Reply
I've also discovered that when two routers get together on the same physical network they talk some protocol I know little about because it usually 'just works' They try and make a spanning tree and frequently get it wrong.
You may have to wait for the arp cache on the other end to expire which may mean waiting for your old lease to expire, but I don't know that.
My money says when you turn it all on again in the morning configured like you want it, it will work fine.
Reply
Leave a comment