отслеживаем чем креаклы в мире заняты пока наши бульварят
предыдущий обзор был по солнечным опреснителям, получаемых из увесистого ствола древесины, но всего в миллиметрах полезной площади...
https://termo-drova.livejournal.com/492926.html
такА жЭ хнЯ, когда микротомом СКОБЛЯТ многосантиметровую заготовку и в изысканиях по другому перспективному направлению развития зеленых технологий!
за гранты малые... вонА чО хотят получить "The objective is to develop scalable nanotechnology for wood structures, utilizing its nanocellulosic skeleton" за трешку лямов зелени https://app.dimensions.ai/details/grant/grant.6814900
НО, сука -не у нас!
напоминаю порядок изложенного:
Наименование исследования..... ; Год опубликования ..... ; Толщина экспериментального образца - в оригинале проведенных работ с их иллюстрациями, для наглядности совсем уЖ тупорылым.
УСТРОЙСТВА ЭЛЕКТРОХИМИЧЕСКОГО НАКОПЛЕНИЯ ЭНЕРГИИ (EES)
1) Trimodal hierarchical carbide-derived carbon monoliths from steam- and CO2-activated wood templates for high rate lithium sulfur batteries.... October 2016... The natural birch samples were cut into discs of approximately 1 g, 10 mm in diameter and 20 mm in height
2) Wood‐Inspired High‐Performance Ultra Thick Bulk Battery Electrodes... March 2018..The thickness of the as‐prepared LCO could be up to 1 mm
3) Highly Conductive, Lightweight, Low‐Tortuosity Carbon Frameworks as Ultrathick 3D Current Collectors ....May 2017....CF with a large thickness of 800 µm was achieved.
4) All-wood, low tortuosity, aqueous, biodegradable supercapacitors with ultra-high capacitance....Jan 2017...The structural virtues of the all-wood-structured ASC device - desirable thickness (up to ∼1 mm)
5) Wood-Derived Hierarchically Porous Electrodes for High-Performance All-Solid-State Supercapacitors ... November 2018......The CW of ≈0.8 mm in thickness was cut to small pieces (≈1.0 cm2 = 1.0 × 1.0 cm).
6) Highly anisotropic, multichannel wood carbon with optimized heteroatom doping for supercapacitor and oxygen reduction reaction...April 2018...use basswood thickness of 1.2 cm
7) Enhancing the Capacitive Performance of Carbonized Wood by Growing FeOOH Nanosheets and Poly(3,4-ethylenedioxythiophene) Coating...September 2018 ...the CW-FeOOH-PEDOT ternary electrodes
8) Manganese Dioxide Supported on Porous Biomorphic Carbons as Hybrid Materials for Energy Storage Devices...October 2018.....Pieces of Beech wood (Fagus sylvatica) were prepared as (10 x 10 x 1) mm3 slabs
9) Efficient Capacitive Deionization Using Natural Basswood-Derived, Freestanding, Hierarchically Porous Carbon Electrodes....August 2018.... 1200 µm refer to the thickness of carbon layer
10) High-capacity, low-tortuosity, and channel-guided lithium metal anode.... April 2017.... Li/C-wood (size is 5 mm × 7 mm) 0.75 mm in thickness
11) Free-standing porous carbon electrodes derived from wood for high-performance Li-O2 battery applications...December 2017...All test samples were of the same dimension (9 mm × 8 mm × 3 mm).
12) Hierarchically Porous, Ultrathick, “Breathable” Wood‐Derived Cathode for Lithium‐Oxygen Batteries....September 2017....battery with the CA‐wood/Ru cathode (thickness: ≈700 µm)
13) A renewable wood-derived cathode for Li-O2 batteries...June 2018 ...dimensions 2 х 2 х 0.8 cm
14) Cellulose ionic conductors with high differential thermal voltage for low-grade heat harvesting nature research.... June 2019....a, Digital image of the nanofluidic cellulosic membrane. Scale bar, 5 mm.
15) Natural sliced wood veneer as a universal porous lightweight substrate for supercapacitor electrode materials...November 2017.... The sliced wood veneers werecut into rectangles measuring 1.0 х 2.0 cm2 and with a thick-ness of approximately 200 mm.
16) Enabling High-Areal-Capacity Lithium-Sulfur Batteries: Designing Anisotropic and Low-Tortuosity Porous Architectures... May 2017... piece of S@C-wood composite (length × width × thickness: 2.0 × 1.8 × 0.1 cm)
https://termo-drova.livejournal.com/492926.html
такА жЭ хнЯ, когда микротомом СКОБЛЯТ многосантиметровую заготовку и в изысканиях по другому перспективному направлению развития зеленых технологий!
за гранты малые... вонА чО хотят получить "The objective is to develop scalable nanotechnology for wood structures, utilizing its nanocellulosic skeleton" за трешку лямов зелени https://app.dimensions.ai/details/grant/grant.6814900
НО, сука -не у нас!
напоминаю порядок изложенного:
Наименование исследования..... ; Год опубликования ..... ; Толщина экспериментального образца - в оригинале проведенных работ с их иллюстрациями, для наглядности совсем уЖ тупорылым.
УСТРОЙСТВА ЭЛЕКТРОХИМИЧЕСКОГО НАКОПЛЕНИЯ ЭНЕРГИИ (EES)
1) Trimodal hierarchical carbide-derived carbon monoliths from steam- and CO2-activated wood templates for high rate lithium sulfur batteries.... October 2016... The natural birch samples were cut into discs of approximately 1 g, 10 mm in diameter and 20 mm in height
2) Wood‐Inspired High‐Performance Ultra Thick Bulk Battery Electrodes... March 2018..The thickness of the as‐prepared LCO could be up to 1 mm
3) Highly Conductive, Lightweight, Low‐Tortuosity Carbon Frameworks as Ultrathick 3D Current Collectors ....May 2017....CF with a large thickness of 800 µm was achieved.
4) All-wood, low tortuosity, aqueous, biodegradable supercapacitors with ultra-high capacitance....Jan 2017...The structural virtues of the all-wood-structured ASC device - desirable thickness (up to ∼1 mm)
5) Wood-Derived Hierarchically Porous Electrodes for High-Performance All-Solid-State Supercapacitors ... November 2018......The CW of ≈0.8 mm in thickness was cut to small pieces (≈1.0 cm2 = 1.0 × 1.0 cm).
6) Highly anisotropic, multichannel wood carbon with optimized heteroatom doping for supercapacitor and oxygen reduction reaction...April 2018...use basswood thickness of 1.2 cm
7) Enhancing the Capacitive Performance of Carbonized Wood by Growing FeOOH Nanosheets and Poly(3,4-ethylenedioxythiophene) Coating...September 2018 ...the CW-FeOOH-PEDOT ternary electrodes
8) Manganese Dioxide Supported on Porous Biomorphic Carbons as Hybrid Materials for Energy Storage Devices...October 2018.....Pieces of Beech wood (Fagus sylvatica) were prepared as (10 x 10 x 1) mm3 slabs
9) Efficient Capacitive Deionization Using Natural Basswood-Derived, Freestanding, Hierarchically Porous Carbon Electrodes....August 2018.... 1200 µm refer to the thickness of carbon layer
10) High-capacity, low-tortuosity, and channel-guided lithium metal anode.... April 2017.... Li/C-wood (size is 5 mm × 7 mm) 0.75 mm in thickness
11) Free-standing porous carbon electrodes derived from wood for high-performance Li-O2 battery applications...December 2017...All test samples were of the same dimension (9 mm × 8 mm × 3 mm).
12) Hierarchically Porous, Ultrathick, “Breathable” Wood‐Derived Cathode for Lithium‐Oxygen Batteries....September 2017....battery with the CA‐wood/Ru cathode (thickness: ≈700 µm)
13) A renewable wood-derived cathode for Li-O2 batteries...June 2018 ...dimensions 2 х 2 х 0.8 cm
14) Cellulose ionic conductors with high differential thermal voltage for low-grade heat harvesting nature research.... June 2019....a, Digital image of the nanofluidic cellulosic membrane. Scale bar, 5 mm.
15) Natural sliced wood veneer as a universal porous lightweight substrate for supercapacitor electrode materials...November 2017.... The sliced wood veneers werecut into rectangles measuring 1.0 х 2.0 cm2 and with a thick-ness of approximately 200 mm.
16) Enabling High-Areal-Capacity Lithium-Sulfur Batteries: Designing Anisotropic and Low-Tortuosity Porous Architectures... May 2017... piece of S@C-wood composite (length × width × thickness: 2.0 × 1.8 × 0.1 cm)