Обновление Cisco Nexus 5672UP
Обновляем Cisco Nexus 5672UP
Копируем на коммутатор обновления.
Вообим команду обновления.
NEXUS# install all kickstart bootflash:n6000-uk9-kickstart.7.3.8.N1.1.bin system bootflash:n6000-uk9.7.3.8.N1.1.bin
Verifying image bootflash:/n6000-uk9-kickstart.7.3.8.N1.1.bin for boot variable "kickstart".
[####################] 100% -- SUCCESS
Verifying image bootflash:/n6000-uk9.7.3.8.N1.1.bin for boot variable "system".
[####################] 100% -- SUCCESS
Verifying image type.
[####################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/n6000-uk9.7.3.8.N1.1.bin.
[####################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:/n6000-uk9-kickstart.7.3.8.N1.1.bin.
[####################] 100% -- SUCCESS
Extracting "bios" version from image bootflash:/n6000-uk9.7.3.8.N1.1.bin.
[####################] 100% -- SUCCESS
Performing module support checks.
[####################] 100% -- SUCCESS
Notifying services about system upgrade.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
0 yes disruptive reset Non-disruptive install not supported if L3 was enabled
1 yes disruptive reset Non-disruptive install not supported if L3 was enabled
2 yes disruptive reset Non-disruptive install not supported if L3 was enabled
Images will be upgraded according to following table:
Module Image Running-Version New-Version Upg-Required
------ ---------------- ---------------------- ---------------------- ------------
0 system 7.3(0)N1(1) 7.3(8)N1(1) yes
0 kickstart 7.3(0)N1(1) 7.3(8)N1(1) yes
0 bios v0.2.0(05/27/2016) v0.2.0(05/27/2016) no
0 power-seq SF-uC:37, SF-FPGA:35 SF-uC:37, SF-FPGA:35 no
0 iofpga v0.0.0.39 v0.0.0.39 no
1 iofpga v0.0.0.18 v0.0.0.18 no
2 iofpga v0.0.0.18 v0.0.0.18 no
Switch will be reloaded for disruptive upgrade.
Do you want to continue with the installation (y/n)? [n] y
Install is in progress, please wait.
Performing runtime checks.
[####################] 100% -- SUCCESS
Setting boot variables.
[####################] 100% -- SUCCESS
Performing configuration copy.
[####################] 100% -- SUCCESS
Finishing the upgrade, switch will reboot in 10 seconds.
K-108-NEXUS-D#
Broadcast message from root (Wed Aug 25 12:58:37 2021):
The system is going down for reboot NOW!