FreeBSD9 не получается читать температуру MB в сервере Supermicro
Всем привет! Помогите решить следующую проблему: Есть сервер Supermicro (модель ниже) требуется получать информацию о температуре материнской платы, скорость вентиляторов и т.д. Больше даже интересует температура материнской платы. Причина - данный сервер, по совместительству, является индикатором температуры в серверной и с помщью скрипта отправляет смс, емайл и рисует графики температуры. В старом сервере (ASUS), который стоял до замены на этот Supermicro, все работало без лишних проблем - mbmon отлично отдавал инфу. Здесь же - перерыл весь гугл, а результата нет.
Возможно поможет следующая инфа (простыни убрал):
[root@testserver:/usr/home # dmidecode]
root@testserver:/usr/home # dmidecode
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Supermicro
Product Name: X7DBR-3
Version: 0123456789
Serial Number: 0123456789
UUID: 13E89A64-D663-A017-8922-06001812911C
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Supermicro
Product Name: X7DBR-3
Version: PCB Version
Serial Number: 0123456789
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: Supermicro
Type: Other
Lock: Not Present
Version: 0123456789
Serial Number: 0123456789
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00001234
Handle 0x002A, DMI type 38, 18 bytes
IPMI Device Information
Interface Type: Unknown
Specification Version: 1.0
I2C Slave Address: 0x00
NV Storage Device: Not Present
Base Address: 0x0000000000000000 (Memory-mapped)
Register Spacing: Successive Byte Boundaries
Все не стал писать, выкусил только важный, на мой взгляд, кусок.
--------------------
[root@testserver:/usr/home # dmesg]
root@testserver:/usr/home # dmesg
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.2-STABLE #2: Thu Nov 21 00:52:10 MSK 2013
master@testserver.company.tld:/usr/obj/usr/src/sys/KERNEL amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
module_register: module acpi/ipmi_acpi already exists!
Module acpi/ipmi_acpi failed to register: 17
module_register: module isa/ipmi_isa already exists!
Module isa/ipmi_isa failed to register: 17
module_register: module smbus/ipmi_smbus already exists!
Module smbus/ipmi_smbus failed to register: 17
module_register: module pci/ipmi2_pci already exists!
Module pci/ipmi2_pci failed to register: 17
module_register: module pci/ipmi_pci already exists!
Module pci/ipmi_pci failed to register: 17
CPU: Intel(R) Xeon(R) CPU X5450 @ 3.00GHz (3000.17-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Family = 0x6 Model = 0x17 Stepping = 6
Features=0xbfebfbff
Features2=0xce3bd
AMD Features=0x20100800
AMD Features2=0x1
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16521564160 (15756 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 irqs 0-23 on motherboard
ioapic1 irqs 24-47 on motherboard
kbd1 at kbdmux0
smbios0: at iomem 0xf5e70-0xf5e8e on motherboard
smbios0: Version: 2.4
acpi0:
on motherboard
acpi0: Power Button (fixed)
cpu0: on acpi0
cpu1: on acpi0
cpu2: on acpi0
cpu3: on acpi0
cpu4: on acpi0
cpu5: on acpi0
cpu6: on acpi0
cpu7: on acpi0
atrtc0: port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
pcib1: at device 2.0 on pci0
pci1: on pcib1
pcib2: irq 16 at device 0.0 on pci1
pci2: on pcib2
pcib3: irq 16 at device 0.0 on pci2
pci3: on pcib3
pcib4: irq 18 at device 2.0 on pci2
pci4: on pcib4
em0: port 0x2000-0x201f mem 0xd8000000-0xd801ffff irq 18 at device 0.0 on pci4
em0: Using an MSI interrupt
em0: Ethernet address: 00:30:48:32:51:1c
em1: port 0x2020-0x203f mem 0xd8020000-0xd803ffff irq 19 at device 0.1 on pci4
em1: Using an MSI interrupt
em1: Ethernet address: 00:30:48:32:51:1d
pcib5: at device 0.3 on pci1
pci5: on pcib5
pcib6: at device 4.0 on pci0
pci6: on pcib6
pcib7: at device 6.0 on pci0
pci7: on pcib7
pci0: at device 8.0 (no driver attached)
pcib8: irq 17 at device 28.0 on pci0
pci8: on pcib8
pcib9: at device 0.0 on pci8
pci9: on pcib9
uhci0: port 0x1800-0x181f irq 17 at device 29.0 on pci0
usbus0 on uhci0
uhci1: port 0x1820-0x183f irq 19 at device 29.1 on pci0
usbus1 on uhci1
uhci2: port 0x1840-0x185f irq 18 at device 29.2 on pci0
usbus2 on uhci2
uhci3: port 0x1860-0x187f irq 16 at device 29.3 on pci0
usbus3 on uhci3
ehci0: mem 0xd8500000-0xd85003ff irq 17 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib10: at device 30.0 on pci0
pci10: on pcib10
vgapci0: port 0x3000-0x30ff mem 0xd0000000-0xd7ffffff,0xd8200000-0xd820ffff irq 18 at device 1.0 on pci10
isab0:
at device 31.0 on pci0
isa0: on isab0
ahci0: port 0x18b0-0x18b7,0x18a4-0x18a7,0x18a8-0x18af,0x18a0-0x18a3,0x1880-0x189f mem 0xd8500400-0xd85007ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
ahcich0: at channel 0 on ahci0
ahcich1: at channel 1 on ahci0
ahcich2: at channel 2 on ahci0
ahcich3: at channel 3 on ahci0
ahcich4: at channel 4 on ahci0
ahcich5: at channel 5 on ahci0
ichsmb0: port 0x1100-0x111f irq 19 at device 31.3 on pci0
smbus0: on ichsmb0
smb0: on smbus0
acpi_button0:
on acpi0
atkbdc0: port 0x60,0x64 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0:
irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: at iomem 0xc0000-0xcafff on isa0
sc0: at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est0 attach returned 6
p4tcc0: on cpu0
est1: on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est1 attach returned 6
p4tcc1: on cpu1
est2: on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est2 attach returned 6
p4tcc2: on cpu2
est3: on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est3 attach returned 6
p4tcc3: on cpu3
est4: on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est4 attach returned 6
p4tcc4: on cpu4
est5: on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est5 attach returned 6
p4tcc5: on cpu5
est6: on cpu6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est6 attach returned 6
p4tcc6: on cpu6
est7: on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est7 attach returned 6
p4tcc7: on cpu7
Timecounters tick every 1.000 msec
IP Filter: v4.1.28 initialized. Default = pass all, Logging = disabled
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, default to accept, logging disabled
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: at usbus0
uhub0: on usbus0
ugen1.1: at usbus1
uhub1: on usbus1
ugen2.1: at usbus2
uhub2: on usbus2
ugen3.1: at usbus3
uhub3: on usbus3
ugen4.1: at usbus4
uhub4: on usbus4
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: ATA-8 SATA 3.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #7 Launched!
Timecounter "TSC-low" frequency 1500084765 Hz quality 1000
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ada0p2 [rw]...
coretemp0: on cpu0
est0: on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est0 attach returned 6
coretemp1: on cpu1
est1: on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est1 attach returned 6
coretemp2: on cpu2
est2: on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est2 attach returned 6
coretemp3: on cpu3
est3: on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est3 attach returned 6
coretemp4: on cpu4
est4: on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est4 attach returned 6
coretemp5: on cpu5
est5: on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est5 attach returned 6
coretemp6: on cpu6
est6: on cpu6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est6 attach returned 6
coretemp7: on cpu7
est7: on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est7 attach returned 6
Это выкушенный кусок dmesg относительно smbus:
smbios0: at iomem 0xf5e70-0xf5e8e on motherboard
smbios0: Version: 2.4
ichsmb0: port 0x1100-0x111f irq 19 at device 31.3 on pci0
smbus0: on ichsmb0
smb0: on smbus0
[root@testserver:/usr/home # pciconf -lv]
root@testserver:/usr/home # pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x928015d9 chip=0x25d88086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000P Chipset Memory Controller Hub'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:2:0: class=0x060400 card=0x00000000 chip=0x25f78086 rev=0xb1 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCI Express x8 Port 2-3'
class = bridge
subclass = PCI-PCI
pcib6@pci0:0:4:0: class=0x060400 card=0x00000000 chip=0x25f88086 rev=0xb1 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCI Express x8 Port 4-5'
class = bridge
subclass = PCI-PCI
pcib7@pci0:0:6:0: class=0x060400 card=0x00000000 chip=0x25f98086 rev=0xb1 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCI Express x8 Port 6-7'
class = bridge
subclass = PCI-PCI
none0@pci0:0:8:0: class=0x088000 card=0x928015d9 chip=0x1a388086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset DMA Engine'
class = base peripheral
hostb1@pci0:0:16:0: class=0x060000 card=0x928015d9 chip=0x25f08086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset FSB Registers'
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:16:1: class=0x060000 card=0x928015d9 chip=0x25f08086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset FSB Registers'
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:16:2: class=0x060000 card=0x928015d9 chip=0x25f08086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset FSB Registers'
class = bridge
subclass = HOST-PCI
hostb4@pci0:0:17:0: class=0x060000 card=0x928015d9 chip=0x25f18086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Reserved Registers'
class = bridge
subclass = HOST-PCI
hostb5@pci0:0:19:0: class=0x060000 card=0x928015d9 chip=0x25f38086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Reserved Registers'
class = bridge
subclass = HOST-PCI
hostb6@pci0:0:21:0: class=0x060000 card=0x928015d9 chip=0x25f58086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset FBD Registers'
class = bridge
subclass = HOST-PCI
hostb7@pci0:0:22:0: class=0x060000 card=0x928015d9 chip=0x25f68086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset FBD Registers'
class = bridge
subclass = HOST-PCI
pcib8@pci0:0:28:0: class=0x060400 card=0x928015d9 chip=0x26908086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset PCI Express Root Port 1'
class = bridge
subclass = PCI-PCI
uhci0@pci0:0:29:0: class=0x0c0300 card=0x928015d9 chip=0x26888086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset UHCI USB Controller'
class = serial bus
subclass = USB
uhci1@pci0:0:29:1: class=0x0c0300 card=0x928015d9 chip=0x26898086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset UHCI USB Controller'
class = serial bus
subclass = USB
uhci2@pci0:0:29:2: class=0x0c0300 card=0x928015d9 chip=0x268a8086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset UHCI USB Controller'
class = serial bus
subclass = USB
uhci3@pci0:0:29:3: class=0x0c0300 card=0x928015d9 chip=0x268b8086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset UHCI USB Controller'
class = serial bus
subclass = USB
ehci0@pci0:0:29:7: class=0x0c0320 card=0x928015d9 chip=0x268c8086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset EHCI USB2 Controller'
class = serial bus
subclass = USB
pcib10@pci0:0:30:0: class=0x060401 card=0x928015d9 chip=0x244e8086 rev=0xd9 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x928015d9 chip=0x26708086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset LPC Interface Controller'
class = bridge
subclass = PCI-ISA
ahci0@pci0:0:31:2: class=0x010601 card=0x928015d9 chip=0x26818086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB SATA AHCI Controller'
class = mass storage
subclass = SATA
ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x928015d9 chip=0x269b8086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset SMBus Controller'
class = serial bus
subclass = SMBus
pcib2@pci0:1:0:0: class=0x060400 card=0x928015d9 chip=0x35008086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '6311ESB/6321ESB PCI Express Upstream Port'
class = bridge
subclass = PCI-PCI
pcib5@pci0:1:0:3: class=0x060400 card=0x928015d9 chip=0x350c8086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '6311ESB/6321ESB PCI Express to PCI-X Bridge'
class = bridge
subclass = PCI-PCI
pcib3@pci0:2:0:0: class=0x060400 card=0x928015d9 chip=0x35108086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '6311ESB/6321ESB PCI Express Downstream Port E1'
class = bridge
subclass = PCI-PCI
pcib4@pci0:2:2:0: class=0x060400 card=0x928015d9 chip=0x35188086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '6311ESB/6321ESB PCI Express Downstream Port E3'
class = bridge
subclass = PCI-PCI
em0@pci0:4:0:0: class=0x020000 card=0x000015d9 chip=0x10968086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '80003ES2LAN Gigabit Ethernet Controller (Copper)'
class = network
subclass = ethernet
em1@pci0:4:0:1: class=0x020000 card=0x000015d9 chip=0x10968086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '80003ES2LAN Gigabit Ethernet Controller (Copper)'
class = network
subclass = ethernet
pcib9@pci0:8:0:0: class=0x060400 card=0x00000000 chip=0x032c8086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = '6702PXH PCI Express-to-PCI Bridge A'
class = bridge
subclass = PCI-PCI
vgapci0@pci0:10:1:0: class=0x030000 card=0x928015d9 chip=0x515e1002 rev=0x02 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'ES1000'
class = display
subclass = VGA
root@testserver:/usr/home #
root@testserver:/usr/home # healthdc
localhost 208.0 0.0 0.0 0000 0000 0000 4.08 4.08 4.08 5.13 11.80 1.21 2.29
----------
root@testserver:/usr/home # mbmon
Temp.= 208.0, 0.0, 0.0; Rot.= 0, 0, 0
Vcore = 4.08, 4.08; Volt. = 4.08, 5.13, 11.80, 1.30, 2.34
^C
--------------
root@testserver:/usr/home # lmmon -p
MB temp:
208C / 406F / 481K
Fans:
1 : 0 rpm
2 : 0 rpm
3 : 0 rpm
Voltages:
Vcore1 : +3.984V
Vcore2 : +3.984V
+ 3.3V : +3.984V
+ 5.0V : +4.984V
+12.0V : +12.250V
-12.0V : -12.562V
- 5.0V : -5.375V
--------------------------
Кусок ядра
#
# System Management Bus (SMB)
#
options ENABLE_ALART # Control alarm on Intel intpm driver
device ipmi
device pbio
device smbios
device smb
device smbus # System management bus
device intpm # Intel power management
device iicbus # I2C bus system
device iicsmb # I2C to SMB bridge
device iicbb # I2C generic bit-banging driver
#
--------------
root@testserver:/usr/home # kldstat
Id Refs Address Size Name
1 16 0xffffffff80200000 14b2f98 kernel
2 1 0xffffffff816b3000 5480 ichsmb.ko
3 1 0xffffffff816b9000 fe68 ipmi.ko
4 1 0xffffffff81812000 c98 coretemp.ko
root@testserver:/usr/home #
-----------------
root@testserver:/usr/home # cat /boot/loader.conf
ichsmb_load="YES"
ipmi_load="YES"
-------------
Единственное, что показывает температуру - sysctl. Но только процессора.
К сожалению, температура процессора, даже усредненная не может считаться мерилом для температуры окружающей среды.
Странно еще, что два метода различаются по результату.
root@testserver:/usr/home # sysctl -a | grep coretemp
dev.cpu.0.coretemp.delta: 70
dev.cpu.0.coretemp.tjmax: 105,0C
dev.cpu.1.coretemp.delta: 70
dev.cpu.1.coretemp.tjmax: 105,0C
dev.cpu.2.coretemp.delta: 67
dev.cpu.2.coretemp.tjmax: 105,0C
dev.cpu.3.coretemp.delta: 64
dev.cpu.3.coretemp.tjmax: 105,0C
dev.cpu.4.coretemp.delta: 65
dev.cpu.4.coretemp.tjmax: 105,0C
dev.cpu.5.coretemp.delta: 62
dev.cpu.5.coretemp.tjmax: 105,0C
dev.cpu.6.coretemp.delta: 67
dev.cpu.6.coretemp.tjmax: 105,0C
dev.cpu.7.coretemp.delta: 67
dev.cpu.7.coretemp.tjmax: 105,0C
--------------------------
root@testserver:/usr/home # sysctl -a | grep temperature
dev.cpu.0.temperature: 35,0C
dev.cpu.1.temperature: 35,0C
dev.cpu.2.temperature: 33,0C
dev.cpu.3.temperature: 39,0C
dev.cpu.4.temperature: 42,0C
dev.cpu.5.temperature: 45,0C
dev.cpu.6.temperature: 38,0C
dev.cpu.7.temperature: 38,0C
P.S. Прошу не пинать в сторону покупки аппаратных цифровых термометров с поддержкой IP и т.д. Возможно к этому придем, а сейчас хотелось бы разобраться с этим вариантом.
Заранее спасибо всем за помощь! Готов к любым экспериментам :-))
Возможно поможет следующая инфа (простыни убрал):
[root@testserver:/usr/home # dmidecode]
root@testserver:/usr/home # dmidecode
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Supermicro
Product Name: X7DBR-3
Version: 0123456789
Serial Number: 0123456789
UUID: 13E89A64-D663-A017-8922-06001812911C
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Supermicro
Product Name: X7DBR-3
Version: PCB Version
Serial Number: 0123456789
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: Supermicro
Type: Other
Lock: Not Present
Version: 0123456789
Serial Number: 0123456789
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00001234
Handle 0x002A, DMI type 38, 18 bytes
IPMI Device Information
Interface Type: Unknown
Specification Version: 1.0
I2C Slave Address: 0x00
NV Storage Device: Not Present
Base Address: 0x0000000000000000 (Memory-mapped)
Register Spacing: Successive Byte Boundaries
Все не стал писать, выкусил только важный, на мой взгляд, кусок.
--------------------
[root@testserver:/usr/home # dmesg]
root@testserver:/usr/home # dmesg
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.2-STABLE #2: Thu Nov 21 00:52:10 MSK 2013
master@testserver.company.tld:/usr/obj/usr/src/sys/KERNEL amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
module_register: module acpi/ipmi_acpi already exists!
Module acpi/ipmi_acpi failed to register: 17
module_register: module isa/ipmi_isa already exists!
Module isa/ipmi_isa failed to register: 17
module_register: module smbus/ipmi_smbus already exists!
Module smbus/ipmi_smbus failed to register: 17
module_register: module pci/ipmi2_pci already exists!
Module pci/ipmi2_pci failed to register: 17
module_register: module pci/ipmi_pci already exists!
Module pci/ipmi_pci failed to register: 17
CPU: Intel(R) Xeon(R) CPU X5450 @ 3.00GHz (3000.17-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Family = 0x6 Model = 0x17 Stepping = 6
Features=0xbfebfbff
Features2=0xce3bd
AMD Features=0x20100800
AMD Features2=0x1
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16521564160 (15756 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 irqs 0-23 on motherboard
ioapic1 irqs 24-47 on motherboard
kbd1 at kbdmux0
smbios0: at iomem 0xf5e70-0xf5e8e on motherboard
smbios0: Version: 2.4
acpi0:
on motherboard
acpi0: Power Button (fixed)
cpu0: on acpi0
cpu1: on acpi0
cpu2: on acpi0
cpu3: on acpi0
cpu4: on acpi0
cpu5: on acpi0
cpu6: on acpi0
cpu7: on acpi0
atrtc0: port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
pcib1: at device 2.0 on pci0
pci1: on pcib1
pcib2: irq 16 at device 0.0 on pci1
pci2: on pcib2
pcib3: irq 16 at device 0.0 on pci2
pci3: on pcib3
pcib4: irq 18 at device 2.0 on pci2
pci4: on pcib4
em0: port 0x2000-0x201f mem 0xd8000000-0xd801ffff irq 18 at device 0.0 on pci4
em0: Using an MSI interrupt
em0: Ethernet address: 00:30:48:32:51:1c
em1: port 0x2020-0x203f mem 0xd8020000-0xd803ffff irq 19 at device 0.1 on pci4
em1: Using an MSI interrupt
em1: Ethernet address: 00:30:48:32:51:1d
pcib5: at device 0.3 on pci1
pci5: on pcib5
pcib6: at device 4.0 on pci0
pci6: on pcib6
pcib7: at device 6.0 on pci0
pci7: on pcib7
pci0: at device 8.0 (no driver attached)
pcib8: irq 17 at device 28.0 on pci0
pci8: on pcib8
pcib9: at device 0.0 on pci8
pci9: on pcib9
uhci0: port 0x1800-0x181f irq 17 at device 29.0 on pci0
usbus0 on uhci0
uhci1: port 0x1820-0x183f irq 19 at device 29.1 on pci0
usbus1 on uhci1
uhci2: port 0x1840-0x185f irq 18 at device 29.2 on pci0
usbus2 on uhci2
uhci3: port 0x1860-0x187f irq 16 at device 29.3 on pci0
usbus3 on uhci3
ehci0: mem 0xd8500000-0xd85003ff irq 17 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib10: at device 30.0 on pci0
pci10: on pcib10
vgapci0: port 0x3000-0x30ff mem 0xd0000000-0xd7ffffff,0xd8200000-0xd820ffff irq 18 at device 1.0 on pci10
isab0:
at device 31.0 on pci0
isa0: on isab0
ahci0: port 0x18b0-0x18b7,0x18a4-0x18a7,0x18a8-0x18af,0x18a0-0x18a3,0x1880-0x189f mem 0xd8500400-0xd85007ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
ahcich0: at channel 0 on ahci0
ahcich1: at channel 1 on ahci0
ahcich2: at channel 2 on ahci0
ahcich3: at channel 3 on ahci0
ahcich4: at channel 4 on ahci0
ahcich5: at channel 5 on ahci0
ichsmb0: port 0x1100-0x111f irq 19 at device 31.3 on pci0
smbus0: on ichsmb0
smb0: on smbus0
acpi_button0:
on acpi0
atkbdc0: port 0x60,0x64 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0:
irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: at iomem 0xc0000-0xcafff on isa0
sc0: at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est0 attach returned 6
p4tcc0: on cpu0
est1: on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est1 attach returned 6
p4tcc1: on cpu1
est2: on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est2 attach returned 6
p4tcc2: on cpu2
est3: on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est3 attach returned 6
p4tcc3: on cpu3
est4: on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est4 attach returned 6
p4tcc4: on cpu4
est5: on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est5 attach returned 6
p4tcc5: on cpu5
est6: on cpu6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est6 attach returned 6
p4tcc6: on cpu6
est7: on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est7 attach returned 6
p4tcc7: on cpu7
Timecounters tick every 1.000 msec
IP Filter: v4.1.28 initialized. Default = pass all, Logging = disabled
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, default to accept, logging disabled
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: at usbus0
uhub0: on usbus0
ugen1.1: at usbus1
uhub1: on usbus1
ugen2.1: at usbus2
uhub2: on usbus2
ugen3.1: at usbus3
uhub3: on usbus3
ugen4.1: at usbus4
uhub4: on usbus4
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: ATA-8 SATA 3.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #7 Launched!
Timecounter "TSC-low" frequency 1500084765 Hz quality 1000
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ada0p2 [rw]...
coretemp0: on cpu0
est0: on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est0 attach returned 6
coretemp1: on cpu1
est1: on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est1 attach returned 6
coretemp2: on cpu2
est2: on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est2 attach returned 6
coretemp3: on cpu3
est3: on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est3 attach returned 6
coretemp4: on cpu4
est4: on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est4 attach returned 6
coretemp5: on cpu5
est5: on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est5 attach returned 6
coretemp6: on cpu6
est6: on cpu6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est6 attach returned 6
coretemp7: on cpu7
est7: on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 921092106000921
device_attach: est7 attach returned 6
Это выкушенный кусок dmesg относительно smbus:
smbios0: at iomem 0xf5e70-0xf5e8e on motherboard
smbios0: Version: 2.4
ichsmb0: port 0x1100-0x111f irq 19 at device 31.3 on pci0
smbus0: on ichsmb0
smb0: on smbus0
[root@testserver:/usr/home # pciconf -lv]
root@testserver:/usr/home # pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x928015d9 chip=0x25d88086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000P Chipset Memory Controller Hub'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:2:0: class=0x060400 card=0x00000000 chip=0x25f78086 rev=0xb1 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCI Express x8 Port 2-3'
class = bridge
subclass = PCI-PCI
pcib6@pci0:0:4:0: class=0x060400 card=0x00000000 chip=0x25f88086 rev=0xb1 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCI Express x8 Port 4-5'
class = bridge
subclass = PCI-PCI
pcib7@pci0:0:6:0: class=0x060400 card=0x00000000 chip=0x25f98086 rev=0xb1 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCI Express x8 Port 6-7'
class = bridge
subclass = PCI-PCI
none0@pci0:0:8:0: class=0x088000 card=0x928015d9 chip=0x1a388086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset DMA Engine'
class = base peripheral
hostb1@pci0:0:16:0: class=0x060000 card=0x928015d9 chip=0x25f08086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset FSB Registers'
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:16:1: class=0x060000 card=0x928015d9 chip=0x25f08086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset FSB Registers'
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:16:2: class=0x060000 card=0x928015d9 chip=0x25f08086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset FSB Registers'
class = bridge
subclass = HOST-PCI
hostb4@pci0:0:17:0: class=0x060000 card=0x928015d9 chip=0x25f18086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Reserved Registers'
class = bridge
subclass = HOST-PCI
hostb5@pci0:0:19:0: class=0x060000 card=0x928015d9 chip=0x25f38086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Reserved Registers'
class = bridge
subclass = HOST-PCI
hostb6@pci0:0:21:0: class=0x060000 card=0x928015d9 chip=0x25f58086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset FBD Registers'
class = bridge
subclass = HOST-PCI
hostb7@pci0:0:22:0: class=0x060000 card=0x928015d9 chip=0x25f68086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset FBD Registers'
class = bridge
subclass = HOST-PCI
pcib8@pci0:0:28:0: class=0x060400 card=0x928015d9 chip=0x26908086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset PCI Express Root Port 1'
class = bridge
subclass = PCI-PCI
uhci0@pci0:0:29:0: class=0x0c0300 card=0x928015d9 chip=0x26888086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset UHCI USB Controller'
class = serial bus
subclass = USB
uhci1@pci0:0:29:1: class=0x0c0300 card=0x928015d9 chip=0x26898086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset UHCI USB Controller'
class = serial bus
subclass = USB
uhci2@pci0:0:29:2: class=0x0c0300 card=0x928015d9 chip=0x268a8086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset UHCI USB Controller'
class = serial bus
subclass = USB
uhci3@pci0:0:29:3: class=0x0c0300 card=0x928015d9 chip=0x268b8086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset UHCI USB Controller'
class = serial bus
subclass = USB
ehci0@pci0:0:29:7: class=0x0c0320 card=0x928015d9 chip=0x268c8086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset EHCI USB2 Controller'
class = serial bus
subclass = USB
pcib10@pci0:0:30:0: class=0x060401 card=0x928015d9 chip=0x244e8086 rev=0xd9 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x928015d9 chip=0x26708086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset LPC Interface Controller'
class = bridge
subclass = PCI-ISA
ahci0@pci0:0:31:2: class=0x010601 card=0x928015d9 chip=0x26818086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB SATA AHCI Controller'
class = mass storage
subclass = SATA
ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x928015d9 chip=0x269b8086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset SMBus Controller'
class = serial bus
subclass = SMBus
pcib2@pci0:1:0:0: class=0x060400 card=0x928015d9 chip=0x35008086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '6311ESB/6321ESB PCI Express Upstream Port'
class = bridge
subclass = PCI-PCI
pcib5@pci0:1:0:3: class=0x060400 card=0x928015d9 chip=0x350c8086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '6311ESB/6321ESB PCI Express to PCI-X Bridge'
class = bridge
subclass = PCI-PCI
pcib3@pci0:2:0:0: class=0x060400 card=0x928015d9 chip=0x35108086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '6311ESB/6321ESB PCI Express Downstream Port E1'
class = bridge
subclass = PCI-PCI
pcib4@pci0:2:2:0: class=0x060400 card=0x928015d9 chip=0x35188086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '6311ESB/6321ESB PCI Express Downstream Port E3'
class = bridge
subclass = PCI-PCI
em0@pci0:4:0:0: class=0x020000 card=0x000015d9 chip=0x10968086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '80003ES2LAN Gigabit Ethernet Controller (Copper)'
class = network
subclass = ethernet
em1@pci0:4:0:1: class=0x020000 card=0x000015d9 chip=0x10968086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '80003ES2LAN Gigabit Ethernet Controller (Copper)'
class = network
subclass = ethernet
pcib9@pci0:8:0:0: class=0x060400 card=0x00000000 chip=0x032c8086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = '6702PXH PCI Express-to-PCI Bridge A'
class = bridge
subclass = PCI-PCI
vgapci0@pci0:10:1:0: class=0x030000 card=0x928015d9 chip=0x515e1002 rev=0x02 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'ES1000'
class = display
subclass = VGA
root@testserver:/usr/home #
root@testserver:/usr/home # healthdc
localhost 208.0 0.0 0.0 0000 0000 0000 4.08 4.08 4.08 5.13 11.80 1.21 2.29
----------
root@testserver:/usr/home # mbmon
Temp.= 208.0, 0.0, 0.0; Rot.= 0, 0, 0
Vcore = 4.08, 4.08; Volt. = 4.08, 5.13, 11.80, 1.30, 2.34
^C
--------------
root@testserver:/usr/home # lmmon -p
MB temp:
208C / 406F / 481K
Fans:
1 : 0 rpm
2 : 0 rpm
3 : 0 rpm
Voltages:
Vcore1 : +3.984V
Vcore2 : +3.984V
+ 3.3V : +3.984V
+ 5.0V : +4.984V
+12.0V : +12.250V
-12.0V : -12.562V
- 5.0V : -5.375V
--------------------------
Кусок ядра
#
# System Management Bus (SMB)
#
options ENABLE_ALART # Control alarm on Intel intpm driver
device ipmi
device pbio
device smbios
device smb
device smbus # System management bus
device intpm # Intel power management
device iicbus # I2C bus system
device iicsmb # I2C to SMB bridge
device iicbb # I2C generic bit-banging driver
#
--------------
root@testserver:/usr/home # kldstat
Id Refs Address Size Name
1 16 0xffffffff80200000 14b2f98 kernel
2 1 0xffffffff816b3000 5480 ichsmb.ko
3 1 0xffffffff816b9000 fe68 ipmi.ko
4 1 0xffffffff81812000 c98 coretemp.ko
root@testserver:/usr/home #
-----------------
root@testserver:/usr/home # cat /boot/loader.conf
ichsmb_load="YES"
ipmi_load="YES"
-------------
Единственное, что показывает температуру - sysctl. Но только процессора.
К сожалению, температура процессора, даже усредненная не может считаться мерилом для температуры окружающей среды.
Странно еще, что два метода различаются по результату.
root@testserver:/usr/home # sysctl -a | grep coretemp
dev.cpu.0.coretemp.delta: 70
dev.cpu.0.coretemp.tjmax: 105,0C
dev.cpu.1.coretemp.delta: 70
dev.cpu.1.coretemp.tjmax: 105,0C
dev.cpu.2.coretemp.delta: 67
dev.cpu.2.coretemp.tjmax: 105,0C
dev.cpu.3.coretemp.delta: 64
dev.cpu.3.coretemp.tjmax: 105,0C
dev.cpu.4.coretemp.delta: 65
dev.cpu.4.coretemp.tjmax: 105,0C
dev.cpu.5.coretemp.delta: 62
dev.cpu.5.coretemp.tjmax: 105,0C
dev.cpu.6.coretemp.delta: 67
dev.cpu.6.coretemp.tjmax: 105,0C
dev.cpu.7.coretemp.delta: 67
dev.cpu.7.coretemp.tjmax: 105,0C
--------------------------
root@testserver:/usr/home # sysctl -a | grep temperature
dev.cpu.0.temperature: 35,0C
dev.cpu.1.temperature: 35,0C
dev.cpu.2.temperature: 33,0C
dev.cpu.3.temperature: 39,0C
dev.cpu.4.temperature: 42,0C
dev.cpu.5.temperature: 45,0C
dev.cpu.6.temperature: 38,0C
dev.cpu.7.temperature: 38,0C
P.S. Прошу не пинать в сторону покупки аппаратных цифровых термометров с поддержкой IP и т.д. Возможно к этому придем, а сейчас хотелось бы разобраться с этим вариантом.
Заранее спасибо всем за помощь! Готов к любым экспериментам :-))