Another Ashley Tisdale Icon Tutorial
Coloring Tutorial for Photoshop
going from
-->
1. At the bottom of your layer box, click the half white half black circle then click Solid Color. (this is a shortcut for new adjustment layer) Type in 011537 which is a Dark Blue. Set that layer to Exclusion, or Subtract in other programmes (i think). Adjust the opacity to fit your picture, mine is set at 100%.
>>>>
2. Do the same thing but this time type in the color a4ddf4 which is a bright blue. Set that layer to Color Burn, or Burn in other programmes (once again, I THINK). Adjust the opacity to fit your picture. Mine is set at 100%.
>>>>
3. Its quite dark, so add another Solid Color layer and type in the color ffdaff, a light pink. Set the layer to Softlight. Its far too bright so lower the opacity. Mine is set at 48%.
>>>>
4. Duplicate your base (Ctrl J) and drag it right to the top. Set the layer on Softlight. If the contrast is too much, lower the opacity. Mine is at 100%.
>>>>
5. Duplicate the Softlight layer. Leave it on Softlight but Desaturate it (Shift Ctrl U). Adjust the opacity to fix your picture. Mine is set at 100%.
>>>>
6. Coloring time! Click the half white half black circle and click Selective Coloring. Type in these settings:
Reds: -100 | +22 | +45 | +37
Yellowe: +100 | +49 | +76 | +51
Neutrals: +27 | +8 | +8 | -19
>>>>
7. Click the same thing to add a Hue/Saturation layer.
Masters: 0 | +22 | +3
Reds 0 | -7 | 0
Yellows 0 | +13 | 0
If its too red, lower the Master Saturation.
>>>>
8. Click the thingy again to add a Channel Mixer layer.
Monochrome Unchecked.
Output Channel Red:
Red: +105
Green: -4
Blue: -7
Constant: 5
Output Channel Green:
Red: 0
Green: +104
Blue: -2
Constant: 0
Output Channel Blue:
Red: +4
Green: -7
Blue: +108
Constant: +4
>>>>
9. Another Selective Color layer.
Reds: -100 | -21 | -19 | +32
Yellowe: +42 | -44 | 0 | 0
Neutrals: +25 | +12 | 0 | -8
If its too red, increase the Neutrals: Cyan.
>>>>
10: Texture time! Add this texture and set it to Screen 100%.
>>>>
>>>>
11. Add this texture and set it to Lighten 100%. i flipped mine horizontally (Edit>Transform>Flip Horizontal) Erase the parts over her face
>>>>
>>>>
Just a tip: If your finished result is too red, add a Color Balance layer and put in:
Midtones: -44 | 0 | 0.
Add your text and other stuff and your done! I added a text brush and a XXX brush. i typed out the word PRINCESS in Times New Roman, then added a white stroke of 2 pixels set at Overlay.
Hope you enjoyed my tutorial!
going from
-->
1. At the bottom of your layer box, click the half white half black circle then click Solid Color. (this is a shortcut for new adjustment layer) Type in 011537 which is a Dark Blue. Set that layer to Exclusion, or Subtract in other programmes (i think). Adjust the opacity to fit your picture, mine is set at 100%.
>>>>
2. Do the same thing but this time type in the color a4ddf4 which is a bright blue. Set that layer to Color Burn, or Burn in other programmes (once again, I THINK). Adjust the opacity to fit your picture. Mine is set at 100%.
>>>>
3. Its quite dark, so add another Solid Color layer and type in the color ffdaff, a light pink. Set the layer to Softlight. Its far too bright so lower the opacity. Mine is set at 48%.
>>>>
4. Duplicate your base (Ctrl J) and drag it right to the top. Set the layer on Softlight. If the contrast is too much, lower the opacity. Mine is at 100%.
>>>>
5. Duplicate the Softlight layer. Leave it on Softlight but Desaturate it (Shift Ctrl U). Adjust the opacity to fix your picture. Mine is set at 100%.
>>>>
6. Coloring time! Click the half white half black circle and click Selective Coloring. Type in these settings:
Reds: -100 | +22 | +45 | +37
Yellowe: +100 | +49 | +76 | +51
Neutrals: +27 | +8 | +8 | -19
>>>>
7. Click the same thing to add a Hue/Saturation layer.
Masters: 0 | +22 | +3
Reds 0 | -7 | 0
Yellows 0 | +13 | 0
If its too red, lower the Master Saturation.
>>>>
8. Click the thingy again to add a Channel Mixer layer.
Monochrome Unchecked.
Output Channel Red:
Red: +105
Green: -4
Blue: -7
Constant: 5
Output Channel Green:
Red: 0
Green: +104
Blue: -2
Constant: 0
Output Channel Blue:
Red: +4
Green: -7
Blue: +108
Constant: +4
>>>>
9. Another Selective Color layer.
Reds: -100 | -21 | -19 | +32
Yellowe: +42 | -44 | 0 | 0
Neutrals: +25 | +12 | 0 | -8
If its too red, increase the Neutrals: Cyan.
>>>>
10: Texture time! Add this texture and set it to Screen 100%.
>>>>
>>>>
11. Add this texture and set it to Lighten 100%. i flipped mine horizontally (Edit>Transform>Flip Horizontal) Erase the parts over her face
>>>>
>>>>
Just a tip: If your finished result is too red, add a Color Balance layer and put in:
Midtones: -44 | 0 | 0.
Add your text and other stuff and your done! I added a text brush and a XXX brush. i typed out the word PRINCESS in Times New Roman, then added a white stroke of 2 pixels set at Overlay.
Hope you enjoyed my tutorial!