project update
Since my last update, I've picked up the necessary hardware to build a SpiffChorder, Mikkel Holm Olsen's homebrew AVR-based chording keyboard. The circuit is now mostly breadboarded, and one of my winter gloves has been converted into a prototype that looks scarily like something out of Serial Experiments Lain. ph34r my wire tentacles!
I have also fallen madly in love with the art of wire-wrapping. It's not a technique people use very often anymore, since soldering is so convenient and cheap, and almost nobody prototypes CPUs with discrete components these days -- we have FPGAs for that. However, it's a great way to hook up components that need a flexible connexion, such as glove-mounted switches that need to tie in to a breadboard. Wrap a lead, then wrap a single header pin, and voila -- breadboardable glove-mounted switch. (Also handy for connecting panel-mount components to a breadboard, using the same header trick. This worked great for the USB-B jack.)
joel tells me that I'm not the only one doing my part to keep wire-wrapping alive -- Steve Chamberlin did prototype his own CPU with discrete components, showed it off at Maker Faire, and taught Joel (and presumably many more people) how to wire-wrap. Keep the dream alive, Steve!
Now to figure out what I did with those 82-ohm resistors, finish that breadboarding job, and try loading Mikkel's hex image onto my ATMega8. Cross your fingers for me -- I want to take this to the hackerspace meeting tonight.
ETA: hm, that's strange, the ISP pins are definitely lined up correctly (my multimeter tells me so!), there's a 2.2k pullup on the RESET line, but I still get the blinky red LED of no love from the AVR-ISPmkII. Actually, first it's the solid red LED of no love which isn't mentioned in the manual, then when I try to load up the image via avrdude it's the blinky red LED of no love. Downloading AVR Studio now, we'll see if the official tools give a more useful error.
I have also fallen madly in love with the art of wire-wrapping. It's not a technique people use very often anymore, since soldering is so convenient and cheap, and almost nobody prototypes CPUs with discrete components these days -- we have FPGAs for that. However, it's a great way to hook up components that need a flexible connexion, such as glove-mounted switches that need to tie in to a breadboard. Wrap a lead, then wrap a single header pin, and voila -- breadboardable glove-mounted switch. (Also handy for connecting panel-mount components to a breadboard, using the same header trick. This worked great for the USB-B jack.)
joel tells me that I'm not the only one doing my part to keep wire-wrapping alive -- Steve Chamberlin did prototype his own CPU with discrete components, showed it off at Maker Faire, and taught Joel (and presumably many more people) how to wire-wrap. Keep the dream alive, Steve!
Now to figure out what I did with those 82-ohm resistors, finish that breadboarding job, and try loading Mikkel's hex image onto my ATMega8. Cross your fingers for me -- I want to take this to the hackerspace meeting tonight.
ETA: hm, that's strange, the ISP pins are definitely lined up correctly (my multimeter tells me so!), there's a 2.2k pullup on the RESET line, but I still get the blinky red LED of no love from the AVR-ISPmkII. Actually, first it's the solid red LED of no love which isn't mentioned in the manual, then when I try to load up the image via avrdude it's the blinky red LED of no love. Downloading AVR Studio now, we'll see if the official tools give a more useful error.