CYBER MASK! ( Lookit what I made!)

[hominivorax]

I got around to working on the mask today and it didn't turn out too badly, if I do say so myself. (I do! XD) I couldn't get very good photos of it, but I do have a couple. This took a couple hours of work. What was done to create this piece: sculpting, baking to dry it quickly, adding to the sculpt, baking again, adding *more*, baking *again*, sanding, painting, sealing, painting again, sealing again, glossing, adding a strap, lining to prevent it from scratching a faceup, touching up the paint and glossing *again* and adding the studs. It turned out a little big, but I'm pleased with it anyway.
My materials list:
clingwrap to put over the face while sculpting
-paperclay
-water for working with the clay
-elastic ( I started out with half inch but had to cut it down, so I'd say if anyone wants to try this, use 1/4 or 3/8 inch)
-an old (clean!) bra insert for padding/lining (but anything that will provide a layer between the clay and the doll will do)
-black acrylic paint
-gloss
-acrylic sealant (matte or gloss, it doesn't matter)
-small scrapbooking brads for the studs(cut the tabs down and use what's left to stick the heads into the mask)
-hot glue or other glue/bonding agent to glue in the straps and lining
Apologies for the photos not being the greatest, but it is so frikkin' *hard* to get a good flash photo of a shiny surface! DX

On Doll


Front View:


Left Side:


Right Side